Please click a link below to view more details:
Drip Cill (drip sill) flashings are fitted to the bottom of a wall cladding run to divert water away from the wall. Drip Cill flashings are attached behind the sheet at the bottom of the wall and then extend beyond the cladding.
Custom drip cills can also be manufactured please contact us to discuss this in more detail
Drip cill flashings are available in 0.7mm gauge with welted edges to give extra strength and stability.
Approx lead time: 7 to 10 working days
Please contact us on 01384 273811 to discuss your requirements in more detail.
Galvanised flashings are manufactured from a high quality hot dipped zinc coated steel with no additional finishes added.
Please be aware that galvanised flashings cannot be painted until they have weathered. This usually takes approx 6 months. If a more durable coloured finish is required please consider polyester painted or PVC plastisol coated drip cills
|Property||Unit of measure||Value||Test standard|
|Standard zinc coating||(g/m2)||275 (Z275)|
|Minimum yield stress||(N/mm2)||220 (S220GD)||EN 10147:2000|
|Bending and profiling quality||DX51D||EN 10142:2000|
|Estimated time to first maintenance*:
Dry and unpolluted
Suburban and rural
Industrial and urban
*Recommendations for period to first maintenance are based on the premise that the strength and integrity of sheets would diminish after the period specified, unless maintenance was carried out. The periods estimated are based on a theoretical weight loss as a result of natural weathering under test conditions. All figures are estimates and do not constitute a guarantee period.