Please click a link below to view more details:
Eaves flashings are attached underneath the roofing sheets at the eaves (gutter) end of the run to achieve a decorative finish across the wall. The internal angle of the flashings can be adjusted to match the roof pitch.
The most popular eaves flashing we produce is 105° internal angle to suit 15° roof pitch.
Eaves flashings are available in 0.7mm gauge with welted edges to give extra strength and stability.
Angles can be adjusted at no extra charge. (Our default internal angle is 105°)
Approx lead time: 7 to 10 working days
Please contact us on 01384 273811 to discuss your requirements in more detail.
Galvanised flashings are manufactured from a high quality hot dipped zinc coated steel with no additional finishes added.
Please be aware that galvanised flashings cannot be painted until they have weathered. This usually takes approx 6 months. If a more durable coloured finish is required please consider polyester painted or PVC plastisol coated eaves flashing
|Property||Unit of measure||Value||Test standard|
|Standard zinc coating||(g/m2)||275 (Z275)|
|Minimum yield stress||(N/mm2)||220 (S220GD)||EN 10147:2000|
|Bending and profiling quality||DX51D||EN 10142:2000|
|Estimated time to first maintenance*:
Dry and unpolluted
Suburban and rural
Industrial and urban
*Recommendations for period to first maintenance are based on the premise that the strength and integrity of sheets would diminish after the period specified, unless maintenance was carried out. The periods estimated are based on a theoretical weight loss as a result of natural weathering under test conditions. All figures are estimates and do not constitute a guarantee period.