Call us on:

01384 273811


Hours of business:

Monday - Thursday 9am to 5pm

Friday 9am to 3pm, closed on weekends

Click here for our opening hours and delivery dates over the festive period.
Please click here for more information.

32/1000VW Vented Wall Cladding Galvanised

32/1000VW Vented Wall Panels Galvanised Click an image to enlarge.
32/1000VW vented wall profile cladding
Galvanised steel
Used predominantly in the manufacture of cattle sheds Vent-air panels can also be used in any kind of building where ventilation is required.
Due to the complexity of venting sheets to your specifications we are unable to provide an online order service for this product. Please contact us to discuss this service in more detail.

Vented sheet prices

Product descriptionPrice per linear metrePrice per linear foot
0.5mm thick galvanised finish £POA* £POA*
* Plus venting surcharge £7.07 plus VAT per sheet

Prices do not include VAT and delivery

Additional information

Please select a tab below for further information:

32/1000VW vented wall profile offers a maximum cover width of one metre and is also available in polyester paint and PVC plastisol coated finishes.

Profile: Accord 32/1000VW Vented Wall Profile

Recommended rail centres*: 1.0m to 1.5m

Cover width: 1000mm

Profile height: 32mm

Pitch: 200mm

Available gauges: 0.5mm only

Cut to size

Approx lead time: 7 to 10 working days

* Recomendations are for guidance only and may differ depending on building scenario. Always consult a structural engineer for accurate structural support information.

Galvanised sheeting is a high quality hot dipped zinc coated steel with no additional finishes added.

Please be aware that galvanised sheets cannot be painted until they have weathered. This usually takes approx 6 months. If a more durable coloured finish is required please consider using polyester paint or PVC plastisol coated sheets

Typical properties

PropertyUnit of measureValueTest standard
Standard zinc coating (g/m2) 275 (Z275)
Minimum yield stress (N/mm2) 220 (S220GD) EN 10147:2000
Bending and profiling quality DX51D EN 10142:2000
Estimated time to first maintenance*:
Dry and unpolluted
Suburban and rural
Industrial and urban



General notes:
*Recommendations for period to first maintenance are based on the premise that the strength and integrity of sheets would diminish after the period specified, unless maintenance was carried out. The periods estimated are based on a theoretical weight loss as a result of natural weathering under test conditions. All figures are estimates and do not constitute a guarantee period.