Call us on:

01384 273811

Email:

sales@steelroofsheets.co.uk

Hours of business:

Monday - Thursday 9am to 5pm

Friday 9am to 3pm, closed on weekends

Click here for our opening hours and delivery dates over the festive period.
Please click here for more information.

Accord Flow Tile Steel Tile Effect Sheets

Accord FlowTile - Tile Grey Click an image to enlarge.
This product is currently unavailable. Please call our sales team on 01384 273811 to discuss your requirements in more detail

Additional information

Please select a tab below for further information:

Pricing

Product description Unit of Measure Unit Price

(Prices do not include delivery)

Additional information

Accord FlowTile roofing sheets give a more traditional look but are made to the same high standards as our Brit-Tile and Wave Tile sheeting.

With an effective cover width of one metre and lengths of up to 5m Accord FlowTile is a genuine alternative to traditional roof tiles. Available in an olive green, tile gry or terracotta finish as standard*.

*Alternative colours may be available in larger quantities please contact us to discuss in more detail.

Profile: Accord Flow-Tile

Purlin centres** 0.700m (two full tiles)

Min recommended roof pitch 14°

Cover width: 1000mm

Profile height: 39.5mm

Pitch: 250mm

Available gauges: 0.5mm and 0.7mm

Cut to size (max length 5m)

Anti-condensation lined sheets available (0.7mm sheets only)

Approx lead time: 10 to 14 working days

** Initial purlin support must be positioned at the first tile drop from the ridge. Every other purlin must be positioned at every second tile drop. Due to this we recommend that you do not install your purlins until the sheets are on site. Recommendations are for guidance only and may differ depending on building scenario. Always consult a structural engineer for accurate structural support information.

Colours

Coated galvanised steel colours

Olive Green Terracotta Tile Grey
Olive Green

BS: 18B27
RAL: 1003020
Paint:
Plastisol:
Terracotta
(Copper Beech)

BS: 04C39
RAL: 8004
Paint:
Plastisol:3
Tile Grey

BS: n/a
RAL: n/a
Paint:
Plastisol:
Special colours are available on request and are subject to minimum orders. Please contact us with your RAL or BS colour reference to discuss the options available to you in more detail.
Notes:
7 digit RAL reference are RAL Design references
Disclaimer:
All colours and finishes shown are web representations. Although we make every effort to show our products in their original colours, due to photography and individual monitors, actual colours may vary. BS and RAL colour references represent the nearest colours and are not an exact match to the colour coating. Metal finishes are not colours they are the natural colour of the material which can vary, images shown are representative as colour coatings and metal finishes can differ from batch to batch.

Anti condensation liner explained

This simple method of rolling a flock material to the underside of our box profile and corrugated sheets reduces the risk of condensation* and drastically cuts the cost associated with full insulated panels.

* Anti condensation requires good air circulation around the sheet to allow water held by the liner to evaporate away. If you are using foam fillers you should notch them out to allow air circulation, alternatively we can quote on the manufacture of custom foams with mesh inserts to allow ventilation. Minimum recommended roof pitch is 10° for liner to be fully effective.
Manufacturing sheets with anti condensation liner may effect the end lap details of the profile. For instance 14/3 corrugated profile may finish on upturns on both sides of the sheet. 

Please click on the video below for a time-lapse video:

Adding anti condensation liner to our roof sheets is a cost effective method of handling condensation problems in many buildings. If you believe that there is a chance of condensation we would highly recommend Dripstop anti condensation liner as an extremely effective solution.

Controlling condensation

When the temperature and humidity conditions in the building reach dew point, moisture will condense on the underside of an uninsulated metal roof sheet. If there is a lot of condensation, water droplets will form and start to fall. The traditional method for eliminating build up of condensation is to insulate the roof so that the temperature on the metal sheet never reaches the dew point.

Drip Stop anti condensation liner is pre rolled onto the sheet and will provide a much more cost effective solution than full roof insulation.

Advantages of anti condensation lined sheets

  • Save up to 25% on traditional solutions
  • Durability (Drip Stop anti-condensation felt liner is not susceptible to ripping, tearing or deterioration like standard insulation and vapor barriers are)
  • Easy to clean (with hose or pressure washers)

The Drip Stop solution

Roofing sheets lined with Drip Stop anti-condensation material provide a medium for trapping this moisture in the specially designed pockets formed in the membrane. Drip Stop holds the moisture until conditions go back below the dew point. The moisture is then released back into the air in the form of normal humidity.

Drip Stop is self adhesive felt liner that is applied to our sheets during the roll forming process. This means that the sheets will arrive with you with Drip Stop already in place, ready to be installed immediately. Your sheets are then installed as normal.

Finish data

PVC Plastisol coated sheeting is a very high quality galvanised steel sheet with a primer paint and final layer of PVC Plastisol coating resulting in a very durable end product that doesn't fade or scratch easily.

200µm durable, abrasion-resistant topcoat

Leathergrain embossed finish

Wide colour range

Galvanised substrate to BS EN 10346:2009 and primed undercoat offering excellent corrosion resistance

Manufacturers coating guarantee of up to 25 years to first maintenance*

*20 years for coastal areas (some colours 10 to 15 years see colours tab for more details) Coating warranty needs to be applied for at point of order.

Typical properties

Finish propertyUnit of measureValueTest standard
Nominal organic coating thickness (µm) 200 EN13523-1
Gloss (60°) (%) 15-35 EN13523-2
Scratch resistance (g) 3500 EN13523-12
Abrasion resistance (Taber, 250 rev, 1kg) (mg) <12 EN13523-16
Flexibility (reverse impact) (J) ≥18 EN13523-5
Adhesion (cross hatch) (%) 100 Pass EN13523-6
Minimum bend radius (T) 0 T@16°C EN13523-7
Corrosion resistance:
Salt Spray
Humidity
(h)
(h)
1000
1000
EN13523-8
EN13523-25
Max continuous operating temp. (°C) 60
Reaction to fire Class 0 BS476 part 6 & 7
Resistance to fire Class AA BS476 part 3
C-s3,d0 roof and wall BS EN 13501
External Fire Performance Broof T4,T3,T2,T1 BS EN 13501

General notes:
The figures contained in this table are typical for solid colours and do not constitute a specification.