Wall Abutments/Internal Corner Flashings

Wall Abutment/Inverted Corner Galvanised

Click an image to enlarge.

Wall Abutment/Inverted Corner Juniper Green

Wall Abutment/Inverted Corner Slate Blue

Wall Abutment/Inverted Corner Solent Blue

Wall Abutment/Inverted Corner Olive Green

Wall Abutment/Inverted Corner Vandyke Brown

Wall Abutment/Internal Corner Flashings 3m Long

To order online or obtain a quotation please specify your requirements below and add to basket.

Please select your colour:

Please select your Finish:

Please select your size:

Please select your internal angle:

Please enter your qty:

Unsure about your sheet sizes? You can enter your roof dimensions into our online quote calculator or contact us

Sorry you can not order online as JavaScript is not enabled in your browser.

Additional information

Please select a tab below for further information:

Product data

Wall abutments are similar to bargeboards but are used when you need to trim and seal steel sheets that finish against a wall. The welts are on the reverse side to bargeboards.

Internal (or inverted) corner fashings are essentially wall abutment flashings used vertically instead of horizontally. Internal corner flashings are used where two walls intersect.

We supply wall abutment/internal corner flashings at 3m lengths in a range of sizes. Internal angles are specified at point of order (The most popular internal angle we supply is 90° but we can fold to any angle at no extra charge). We can also make the legs to custom sizes if the size you require is not listed.

Wall abutments/internal corners are available in 0.7mm gauge with welted edges to give extra strength and stability.

Available in a wide range of sizes, colours and angles

Approx lead time: 10 to 20 working days

Please contact us on 01384 273811 to discuss your requirements in more detail.

Wall abutment

Colours

Self coloured


Galvanised (Z275) Self Coloured

Coated galvanised steel colours


White BS: 00E55 RAL: 9003 Paint: Plastisol:	Eco Grey (Grey Primer) Colour may vary Paint: Plastisol:	Hamlet (Grey White) BS: n/a RAL: 9002 Paint: Plastisol:	Albatross (Gull Grey) BS: 18B17 RAL: 2408005 Paint: Plastisol:

Goosewing Grey BS: 10A05 RAL: 7038 Paint: Plastisol:	Merlin Grey BS: 18B25 RAL: 1804005 Paint: Plastisol:	Anthracite Grey BS: n/a RAL: 7016 Paint: Plastisol:	Tile Grey BS: n/a RAL: n/a Paint: Plastisol:

Wedgewood BS: 18C37 RAL: 2205015 Paint: Plastisol:	Solent Blue (Cornflower) BS: 18E53 RAL: 2604020 Paint: Plastisol:	Slate Blue (Raven) BS: 18B29 RAL: n/a Paint: Plastisol:	Ocean Blue BS: 18C39 RAL: 5001 Paint: Plastisol:

Sargasso (Sapphire) BS: n/a RAL: 5003 Paint: Plastisol:	Black BS: 00E53 RAL: 9005 Paint: Plastisol:	Heritage (Forest Green) BS: n/a RAL: 6002 Paint: Plastisol:	Olive Green BS: 12B27 RAL: 1003020 Paint: Plastisol:

Juniper Green BS: 12B29 RAL: n/a Paint: Plastisol:	Moorland (Khaki) BS: 12B21 RAL: 1006020 Paint: Plastisol:	Meadowland (Willow) BS: 12B17 RAL: 1008020 Paint: Plastisol:	Vandyke Brown BS: 08B29 RAL: 8025 Paint: Plastisol:

Terracotta (Copper Beech) BS: 04C39 RAL: 8004 Paint: Plastisol:	Mushroom BS: 10B19 RAL: 1013 Paint: Plastisol:	Honesty BS: 10C31 RAL: 1015 Paint: Plastisol:	Poppy Red (Flame Red) BS: 04E53 RAL: 2002 Paint: Plastisol:

Silver Metallic BS: n/a RAL: 9006 Paint: Plastisol:

Powder coated steel cladding sheets

If you require a colour that is not in available in pre coated material we have the ability to powder coat the sheets to RAL numbers. Prices and lead times vary based on the colour required and the quantity and size of the flashings. Please call or email our sales team on 01384 273811 to discuss your requirements in more detail.

Notes:
7 digit RAL reference are RAL Design references

Disclaimer: All colours and finishes shown are web representations. Although we make every effort to show our products in their original colours, due to photography and individual monitors, actual colours may vary. BS and RAL colour references represent the nearest colours and are not an exact match to the colour coating. Metal finishes are not colours they are the natural colour of the material which can vary, images shown are representative as colour coatings and metal finishes can differ from batch to batch.

Finish data

Galvanised

Galvanised sheeting is a high quality hot dipped zinc coated steel with no additional finishes added.

Please be aware that galvanised sheets cannot usually be painted until they have weathered. This usually takes approx 6 months. If a more durable coloured finish is required please consider using paint or PVC plastisol coated sheets

Typical properties

Property	Unit of measure	Value	Test standard
Standard zinc coating	(g/m²)	275 (Z275)
Minimum yield stress	(N/mm²)	220 (S220GD)	EN 10147:2000
Bending and profiling quality		DX51D	EN 10142:2000
Estimated time to first maintenance*: Dry and unpolluted Suburban and rural Industrial and urban Coastal	(years) (years) (years) (years)	20-50 5-10 2-5 1-5
Fire classification		A1	BS EN 13501

Notes:
*Recommendations for period to first maintenance are based on the premise that the strength and integrity of sheets would diminish after the period specified, unless maintenance was carried out. The periods estimated are based on a theoretical weight loss as a result of natural weathering under test conditions. All figures are estimates and do not constitute a guarantee period.

Please be aware that galvanised products have a shorter expected lifespan than coated products. We would recommend that galvanised products are not used within 3 miles of the coast as the lifespan can be significantly reduced.

Polyester and metallic paint

Paint coated sheets are a very high quality galvanised steel sheets with a primer paint finished with a final layer of polyester or metallic paint.

Five paint colours*

Galvanised substrate to BS EN 10346:2009 and primed undercoat offering excellent corrosion resistance

Please be aware that polyester paint coated sheets and flashings are susceptible to light scratching during transport, unloading and installation. If you are purchasing polyester paint coated sheets or flashings we highly recommend ordering a tin of touch up paint. If a more durable finish is required please consider using PVC plastisol coated sheets.

*Metallic Silver only available in 0.7mm gauge

Typical properties

Polyester Paint

Finish property	Unit of measure	Value	Test standard
Nominal organic coating thickness	(µm)	25	EN13523-1
Specular gloss (60°)	(%)	10-35	EN13523-2
Scratch resistance	(g)	3000	EN13523-12
Abrasion resistance (Taber, 250 rev, 1kg)	(mg)	<30	EN13523-16
Flexibility (minimum bend radius)	(T)	1.5	EN13523-5
Adhesion	(%)	100 Pass	EN13523-6
Corrosion resistance: Salt Spray Humidity	(h) (h)	500 1000	EN13523-8 EN13523-25
UV Resistance		Excellent	EN10169
Fire classification		A1	BS EN 13501

Metallic Silver Paint

Finish property	Unit of measure	Value	Test standard
Nominal organic coating thickness	(µm)	50	EN13523-1
Specular gloss (60°)	(%)	30-40	EN13523-2
Scratch resistance	(g)	3500	EN13523-12
Abrasion resistance (Taber, 250 rev, 1kg)	(mg)	<20	EN13523-16
Flexibility (minimum bend radius)	(T)	0.5 @ 16°C	EN13523-7
Adhesion	(%)	100 Pass	EN13523-6
Corrosion resistance: Salt Spray Humidity	(h) (h)	1000 1000	EN13523-8 EN13523-25
UV Resistance Category		Ruv4	EN10169
Fire classification		A1	BS EN 13501

General notes:
The figures contained in this table are typical for the topcoat and solid colours and do not constitute a specification.

PVC Plastisol

PVC Plastisol coated sheeting is a very high quality galvanised steel sheet with a primer paint and final layer of PVC Plastisol coating resulting in a very durable end product that doesn't fade or scratch easily.

200µm coating thickness durable, abrasion-resistant topcoat

Leathergrain embossed finish

Wide colour range

Galvanised substrate to BS EN 10346:2009 and primed undercoat offering excellent corrosion resistance

Manufacturers coating guarantee of up to 25 years to first maintenance*

*20 years for coastal areas (some colours 10 to 15 years see colours tab for more details) Coating warranty needs to be applied for at point of order.

Typical properties

Finish property	Unit of measure	Value	Test standard
Nominal organic coating thickness	(µm)	200	EN13523-1
Gloss (60°)	(%)	15-35	EN13523-2
Scratch resistance	(g)	3500	EN13523-12
Abrasion resistance (Taber, 250 rev, 1kg)	(mg)	<12	EN13523-16
Flexibility (reverse impact)	(J)	≥18	EN13523-5
Adhesion (cross hatch)	(%)	100 Pass	EN13523-6
Minimum bend radius	(T)	0 T@16°C	EN13523-7
Corrosion resistance: Salt Spray Humidity	(h) (h)	1000 1000	EN13523-8 EN13523-25
Max continuous operating temp.	(°C)	60
Reaction to fire		Class 0	BS476 part 6 & 7
Resistance to fire		Class AA	BS476 part 3
		C-s3,d0 roof and wall	BS EN 13501
External Fire Performance		Broof T4,T3,T2,T1	BS EN 13501